FLECHA: A macro-enabled spreadsheet for developing moment-curvature diagrams
17 Apr 2018 | Contributor(s): Santiago Pujol
FLECHA is a macro-enabled spreadsheet program for developing moment-curvature diagrams for reinforced concrete sections. The spreadsheet was written by Santiago Pujol and was last revised in April 2001.
Tests of Continuous Beams with Large Reinforcement Ratios
31 Jul 2018 | Contributor(s): Aishwarya Y. Puranam, Santiago Pujol
Tests of continuous beams were conducted to investigate maximum longitudinal reinforcement limits (currently expressed in terms of net tensile strain) and moment redistribution at that limit. The following hypothesis was tested:Nominally identical continuous beams, one with nearly the...
04 Apr 2018 | Contributor(s): Prateek Pratap Shah, Santiago Pujol
This data set contains ground motion data, and building photos, drawings and plans for the Oaxaca 80 building. Additional data will be added to the data set if and/or when they become available.All questions regarding the database can be addressed to Prateek Shah at...
Promotion and Outreach
15 Jan 2018 | Active Documents | Contributor(s): Santiago Pujol, Lucas Laughery, Jonathan Monical
ActivityDateOutcomeMet with researcher in materials chemistry to showcase DataHub and help them create a datasetMay - July 2017New dataset created: https://datacenterhub.org/resources/14436In June there were 18,000...
Service Load Deflections in Slabs with High Strength Steel Reinforcement
11 Oct 2017 | Databases | Contributor(s): Alana Lund, Aishwarya Y. Puranam, Ryan T. Whelchel, Lucas Laughery, Henrik Skovgaard, Santiago Pujol
Three series of tests were conducted at Bowen Laboratory, Purdue University, on slabs longitudinally reinforced with #3 ASTM A615 Gr. 60 or ASTM A1035 Gr.120 bars. Two slabs were tested in each series, one containing Gr. 60 steel and one containing Gr. 120 steel. All members were 14...