Dynamic Behavior of Slickensided Surfaces (NEES-2005-0027)

By James Duncan, Ross Boulanger

View Data

Licensed according to this deed.

Category

Databases

Published on

Abstract

Title: Dynamic Behavior of Slickensided Surfaces (NEES-2005-0027)

Year Of Curation: 2011

Description: This project consists of a series of centrifuge tests that were performed using the UC Davis geotechnical centrifuge. The purpose of these tests was to measure the amount of displacement that occurs during earthquake shaking along a preformed slickensided clay surface. The recorded data can be used to evaluate the effectiveness of Newmark's method for predicting earthquake-induced displacements in clays. (

Award: http://www.nsf.gov/awardsearch/showAward?AWD_ID=0321789

PIs & CoPIs: Ross Boulanger, James Duncan

Dates: March 01, 2004 - February 28, 2006

Organizations: University of California, Davis, CA, United States;Virginia Polytechnic Institute and State University, VA, United States

Facilities: Virginia Polytechnic Institute and State University, VA, United States; University of California, Davis, CA, United States

Sponsor: NSF - 0321789

Keywords: Clay, Slickensided Surface, Centrifuge Testing, Shear, Shake Table

Publications "UCD/CGMDR-05/03 Collaborative Research: Dynamic Behavior of Slickensided Surfaces - Centrifuge Data Report for CLM01"

"UCD/CGMDR-05/04 Collaborative Research: Dynamic Behavior of Slickensided Surfaces - Centrifuge Data Report for CLM02"

Cite this work

Researchers should cite this work as follows:

  • James Duncan; Ross Boulanger (2017), "Dynamic Behavior of Slickensided Surfaces (NEES-2005-0027)," https://datacenterhub.org/resources/14272.

    BibTex | EndNote

Tags